Carlton 2518 Wood Chipper Apache |
Carlton’s newest series in Drum Style Chippers- The Apaches. The 2518 features a massive 25-inch by 18-inch opening combined with a 37-inch diameter pocketed drum, allowing it to easily consume the largest trees. Aggressive feeding is handled by a dual pump hydraulic system controlled by a digital reversing autofeed system. The Carlton Apache series uses an exclusive long pivot arm for the 15¾" diameter top feed wheel. This long arm pivot gives the top feed wheel a smooth vertical lift path, allowing for easy opening over the largest butt ends. The Apache series also incorporates an exclusive Air Vortex Control to channel and accelerate discharge air, giving the Apache series high discharge velocities and great chip throwing power.
The Carlton 2518 is designed and built to stand up in the toughest applications, able to withstand all the punishment you and your crew can dish out. From its high capacity axles and tires, to its heavy-duty frame, back to the rigid 3/8" feed table, the 2518 is built right. Carlton understands the environment the 2518 must survive in everyday. Thoughtful design elements like concealed wiring, integrated single manifold hydraulics with electronic control, and dual lift cylinders enhance performance and improve crew productivity. For Performance, Durability and Dependability nothing compares to Carlton.
|
| General |
|
| Weight |
9300 Pounds |
| Length |
211 inches |
| Height |
100 inches |
| Width |
56 inches |
| Tires |
245/70R17.5 Ld Rng J 6005 # @125 PSI |
| Axle |
Dexter Torflex 10,000 Pound Cap |
| Brakes |
Electric with Breakaway Switch |
| Hitch |
Five Inch Height Adjustable Pintle |
| Fuel Capacity |
35 Gallons |
| Battery |
29 HVD 650 CCA |
| Jack Stand |
10000 # Cap Screw Type Swing Up |
|
|
|
| Engine Options |
|
|
| Manufacturer |
John Deere |
|
| Number of Cylinders |
Four |
|
| Bore |
4.19 Inches (106 mm) |
|
| Stroke |
5.0 Inches (127 mm) |
|
| Displacement |
276 Cubic Inches (4.5L) |
|
| Maximum RPM |
2400 RPM |
|
| Horsepower |
140HP* |
|
| Torque |
367 Ft Lbs (498 NM) |
|
| Cooling Medium |
Liquid Water/Antifreeze Mixture |
|
| Air Cleaner |
Two Stage Dry Type |
|
| Oil Filter |
Full Flow Spin On |
|
| Oil Capacity |
13 Quarts |
|
| Oil Type |
John Deere |
|
| Electrical |
12 Volt |
|
| Gauges |
Powerview |
|
| Clutch |
Twin Disk 11 1/2" Over Center |
|
|
|
|
| Bearings |
|
| Disk Bearings |
2 15/16 inches Tapered Roller |
| Feed Roller Bearings |
2 inches Tapered Roller |
| Disk Shaft |
3 ½ inches |
| Feed Roller Shaft |
2 inches |
| Chipper Drum |
|
| Drum Diameter |
37 inches |
| Drum Width w/Fans |
31 ¾ inches |
| Disk Balance |
Precision High Speed Balanced |
| Drum Speed |
1160 RPM Nominal |
| Number of Knives |
4 |
| Knife Dimensions |
12 15/16" x 5 1/2" x 5/8" |
| Anvil |
5 7\8" x 24 ¾" x 1/2" AR400 |
| Chip Throwers |
20 1\4" x 3" x 10" |
| Cutting Dimensions |
|
| Throat Opening |
18" x 25" |
| Hydraulic System |
|
| Hyd Pump Displacement |
1.5 in cu/rev total from 2 pumps |
| Hyd Pump Drive System |
Direct Drive off Engine Mount |
| Flow |
16 GPM Total Tandem Systems |
| System Relief |
2500 PSI |
| Oil Tank Capacity |
18 Gallons |
| Oil Type |
AW32 |
| Valve |
DO5 Electric Solonoid |
| Hose |
16,000 PSI Burst - Exceeds SAE 100R2 |
| Oil Filter |
10 Micron Return with Suction Strainer |
| Drive System |
|
| Engine Sheave |
6/5V8.5 |
| Jackshaft Sheave |
6/5V18.7 |
| Drive Belt |
6/5V1800 |
| Cutter Head Shaft |
3 ½ inches |
| Feed System |
|
| Feed Motor |
46 In Cu Top 32 In Cu Bottom |
| Flow |
Separate Systems for Top/Btm Feed |
| Hydraulic Drive |
Live – Driven off engine |
| Autofeed |
Reversing, Digital, Fully Adjustable |
| Feed Rate |
100 Feet Per Minute |
| Feed Rollers |
Top: 15 3/4" Dia Bottom: 10 ½" Dia |
| Springs |
Two 30" Tight Wound Powder Coated |
| Feed Pivot Bearings |
Two 2" Tapered Roller |
| Lift Cylinders |
Two 2 x 18 with 1" attachments |
| Discharge |
Crank Adjustable Swivel and Height |
| Frame |
|
| Main Trailer Tongue |
3" x 8" with 1/2" wall |
| Main Trailer Frame |
3" x 8" with 1/4" wall |
| Telescoping Tongue |
N/A |
| Engine Channel Mnts |
4" Channel with 15/16" web |
| Infeed Chute |
1/4" with 2" x 2" x 1/4" tube frame |
| Folding Infeed Tray |
3/8" Plate w/2" x 2" and 2" x 4" Tube |
| Folding Tray Lock |
N/A |
| Discharge Chute |
12 gauge |
| Discharge Lock |
¾" Spring Loaded Pin |
| Fuel Tank |
10 gauge with baffles rubber mtd |
| Hydraulic Tank |
10 gauge with baffles rubber mtd |
| Battery Box |
10 gauge - lockable |
| Fenders |
3/16" checker plate |
| Feeder Bar |
1 1/2" OD x 1/8" wall - removable |
| Radiator Guards |
N/A |
| Light Brackets |
3/16" with hidden wiring |
| Hitch Plate |
3/4" Plate adjustable 5" Up/Down |
(DUE
TO CONTINUOUS DESIGN IMPROVEMENTS
CONSULT FACTORY PRIOR TO ORDERING 1-800-243-9335.) |
|
|
 |
|
| |
|
|
|
| |
|
 |
|
Carlton’s Exclusive Air Vortex Control channels and accelerates discharge air giving the Apache series high discharge velocities and great chip
throwing power. |
|
Digitally Controlled Reversing Autofeed Plus monitors engine rpm and adjusts the feed automatically. This system has the ability to start, stop, and reverse the feed of the material into the chipper based on parameters set by the operator.
|
|
Integrated Hydraulic Cooler is tucked out of harm’s way. Reduces fluid temperatures, increasing performance and extending component life.
|
|
Dual Edge Knives are easily accessible, making routine maintenance an easy process. Bolts and Nuts are both removable eliminating problems caused by cross threading or stripping pockets.
|
|
Optional Hydraulic Winch easily presents the big material to the feed wheel.
|
|
Long Arm Pivot Design allows the feed wheel to easily open over the largest butt ends. Frame extends beneath the infeed table for the ultimate in strength.
|
|
Tandem Pump System provides power independently to each feed wheel. This system ensures the most power at all times to the feed system.
|
|
10,000-pound Capacity Dexter Torflex Axle makes the 2518 tow great, while minimizing turf damage.
|
|
|
|
|
|
 |
|
| |
|
|
